Note that the picture ends with. So all you have to do is add the folder names. Renaming a file or folder would use the move command, since the copy command causes there to be duplicates.
I am using the method above mentioned to copy files to a USB card. After issuing this command I then issue a command to eject the USB card. Number in the range 0—, inclusive, that represents the blue component of the color.
Remarks Application methods and properties that accept a color specification expect that specification to be a number representing an RGB color value. An RGB color value specifies the relative intensity of red, green, and blue to cause a specific color to be displayed. The value for any argument to RGB that exceeds is assumed to be Syntax QBColor color The required color argument is a whole number in the range 0— Syntax Beep Remarks The frequency and duration of the beep depend on your hardware and system software, and vary among computers.
Beep ' Sound a tone. Next I InputBox Displays a prompt in a dialog box, waits for the user to input text or click a button, and returns a String containing the contents of the text box. String expression displayed in the text box as the default response if no other input is provided.
If you omit default, the text box is displayed empty. Numeric expression that specifies, in twips, the horizontal distance of the left edge of the dialog box from the left edge of the screen. If xpos is omitted, the dialog box is horizontally centered.
Numeric expression that specifies, in twips, the vertical distance of the upper edge of the dialog box from the top of the screen. If ypos is omitted, the dialog box is vertically positioned approximately one-third of the way down the screen. The Help button is added automatically. HLP", 10 ' Display dialog box at position , Syntax Load object The object placeholder represents an object expression that evaluates to an object in the Applies To list.
Remarks When an object is loaded, it is placed in memory, but isn't visible. Use the Show method to make the object visible. Until an object is visible, a user can't interact with it. The object can be manipulated programmatically in its Initialize event procedure. Syntax Unload object The required object placeholder represents an object expression that evaluates to an object in the Applies To list.
Remarks When an object is unloaded, it's removed from memory and all memory associated with the object is reclaimed. Until it is placed in memory again using the Load statement, a user can't interact with an object, and the object can't be manipulated programmatically.
String expression specifying the keystrokes to send. Wait Optional. Boolean value specifying the wait mode. If False default , control is returned to the procedure immediately after the keys are sent.
If True, keystrokes must be processed before control is returned to the procedure. Remarks Each key is represented by one or more characters. To specify a single keyboard character, use the character itself.
For example, to represent the letter A, use "A" for string. To represent more than one character, append each additional character to the one preceding it. Brackets [ ] have no special meaning to SendKeys, but you must enclose them in braces. In other applications, brackets do have a special meaning that may be significant when dynamic data exchange DDE occurs. You must put a space between key and number.
Syntax object. A valid object. The full path to a picture file. String expression specifying the title in the title bar of the application window you want to activate. The task ID returned by the Shell function can be used in place of title to activate an application. Boolean value specifying whether the calling application has the focus before activating another.
If False default , the specified application is immediately activated, even if the calling application does not have the focus. If True, the calling application waits until it has the focus, then activates the specified application. Remarks The AppActivate statement changes the focus to the named application or window but does not affect whether it is maximized or minimized.
Focus moves from the activated application window when the user takes some action to change the focus or close the window. Use the Shell function to start an application and set the window style. Syntax IsNull expression The required expression argument is a Variant containing a numeric expression or string expression. IsEmpty Returns a Boolean value indicating whether a variable has been initialized.
Syntax IsEmpty expression The required expression argument is a Variant containing a numeric or string expression. However, because IsEmpty is used to determine if individual variables are initialized, the expression argument is most often a single variable name.
Remarks IsEmpty returns True if the variable is uninitialized, or is explicitly set to Empty; otherwise, it returns False. False is always returned if expression contains more than one variable. IsEmpty only returns meaningful information for variants. IsNumeric Returns a Boolean value indicating whether an expression can be evaluated as a number. Syntax IsNumeric expression The required expression argument is a Variant containing a numeric expression or string expression.
Remarks IsNumeric returns True if the entire expression is recognized as a number; otherwise, it returns False. IsNumeric returns False if expression is a date expression.
Else Statement Conditionally executes a group of statements, depending on the value of an expression. Syntax If condition Then [statements] [Else elsestatements] Or, you can use the block form syntax: If condition Then [statements] [ElseIf condition-n Then [elseifstatements] Else statement syntax has these parts: Part Description condition Required.
One or more of the following two types of expressions: A numeric expression or string expression that evaluates to True or False. If condition is Null, condition is treated as False.
An expression of the form TypeOf objectname Is objecttype. The objectname is any object reference and objecttype is any valid object type. The expression is True if objectname is of the object type specified by objecttype; otherwise it is False. One or more statements separated by colons; executed if condition is True. Same as condition. One or more statements executed if associated condition-n is True. One or more statements executed if no previous condition or condition-n expression is True.
Never required by itself but may be placed anywhere in a procedure to end code execution, close files opened with the Open statement and to clear variables. End Function Required to end a Function statement. End Select Required to end a Select Case statement. End Sub Required to end a Sub statement. End Type Required to end a user-defined type definition Type statement.
End With Required to end a With statement. Remarks When executed, the End statement resets all module-level variables and all static local variables in all modules. To preserve the value of these variables, use the Stop statement instead. You can then resume execution while preserving the value of those variables. Syntax Stop Remarks You can place Stop statements anywhere in procedures to suspend execution. Using the Stop statement is similar to setting a breahkpoint in the code.
The Stop statement suspends execution, but unlike End, it doesn't close any files or clear variables, unless it is in a compiled executable. Syntax Switch expr-1, value-1[, expr-2, value-2 … [, expr-n,value-n]] The Switch function syntax has these parts: Part Description expr Required. Variant expression you want to evaluate. Value or expression to be returned if the corresponding expression is True. Remarks The Switch function argument list consists of pairs of expressions and values.
The expressions are evaluated from left to right, and the value associated with the first expression to evaluate to True is returned. If the parts aren't properly paired, a run-time error occurs.
For example, if expr-1 is True, Switch returns value If expr-1 is False, but expr-2 is True, Switch returns value-2, and so on. Goto Branches unconditionally to a specified line within a procedure.
Syntax GoTo line The required line argument can be any line label or line number. Remarks GoTo can branch only to lines within the procedure where it appears. Note Too many GoTo statements can make code difficult to read and debug. Use structured control statements Do Loop, For Next, If Else, Select Case whenever possible. GoTo Statements Branch to one of several specified lines, depending on the value of an expression.
GoSub and On GoTo statement syntax has these parts: Part Description expression Required. Any numeric expression that evaluates to a whole number between 0 and , inclusive.
If expression is any number other than a whole number, it is rounded before it is evaluated. List of line numbers or line labels separated by commas. Remarks The value of expression determines which line is branched to in destinationlist. If the value of expression is less than 1 or greater than the number of items in the list, one of the following results occurs: If expression is Then Equal to 0 Control drops to the statement following On GoSub or On Greater than number of items in list Control drops to the statement following On Negative An error occurs.
Greater than An error occurs. You can mix line numbers and line labels in the same list. You can use as many line labels and line numbers as you like with On However, if you use more labels or numbers than fit on a single line, you must use the line-continuation character to continue the logical line onto the next physical line.
Return Statement Branches to and returns from a subroutine within a procedure. Syntax GoSub line Return The line argument can be any line label or line number. Remarks You can use GoSub and Return anywhere in a procedure, but GoSub and the corresponding Return statement must be in the same procedure.
A subroutine can contain more than one Return statement, but the first Return statement encountered causes the flow of execution to branch back to the statement immediately following the most recently executed GoSub statement. Note You can't enter or exit Sub procedures with GoSub Return ' Return control to statement.
End Sub ' following the GoSub statement. With Statement Executes a series of statements on a single object or a user-defined type. Name of an object or a user-defined type. One or more statements to be executed on object. Remarks The With statement allows you to perform a series of statements on a specified object without requalifying the name of the object.
For example, to change a number of different properties on a single object, place the property assignment statements within the With control structure, referring to the object once instead of referring to it with each property assignment.
The following example illustrates use of the With statement to assign values to several properties of the same object. Example: With MyLabel. Next Statement Repeats a group of statements a specified number of times. Numeric variable used as a loop counter. The variable can't be a Boolean or an array element. Initial value of counter. Final value of counter. Amount counter is changed each time through the loop.
If not specified, step defaults to one. One or more statements between For and Next that are executed the specified number of times.
Remarks The step argument can be either positive or negative. At this point, either the statements in the loop execute again based on the same test that caused the loop to execute initially , or the loop is exited and execution continues with the statement following the Next statement.
Next Words While Wend Statement Executes a series of statements as long as a given condition is True. Syntax While condition [statements] Wend The While Wend statement syntax has these parts: Part Description condition Required. Numeric expression or string expression that evaluates to True or False.
One or more statements executed while condition is True. Remarks If condition is True, all statements are executed until the Wend statement is encountered. Control then returns to the While statement and condition is again checked. If condition is still True, the process is repeated. If it is not True, execution resumes with the statement following the Wend statement.
Wend loops can be nested to any level. Each Wend matches the most recent While. Tip The Do Loop statement provides a more structured and flexible way to perform looping. Print Counter ' Prints 20 in the Immediate window. Loop Statement Repeats a block of statements while a condition is True or until a condition becomes True.
Numeric expression or string expression that is True or False. Exit Do is often used after evaluating some condition, for example, If…Then, in which case the Exit Do statement transfers control to the statement immediately following the Loop.
When used within nested Do…Loop statements, Exit Do transfers control to the loop that is one nested level above the loop where Exit Do occurs.
Do ' Outer loop. Exit Do ' Exit inner loop. IIF Returns one of two parts, depending on the evaluation of an expression. Expression you want to evaluate. Value or expression returned if expr is True. Value or expression returned if expr is False.
Because of this, you should watch for undesirable side effects. For example, if evaluating falsepart results in a division by zero error, an error occurs even if expr is True.
Next Statement Repeats a group of statements for each element in an array or collection. Next statement syntax has these parts: Part Description element Required. Variable used to iterate through the elements of the collection or array.
For collections, element can only be a Variant variable, a generic object variable, or any specific object variable. For arrays, element can only be a Variant variable. Name of an object collection or array except an array of user- defined types. One or more statements that are executed on each item in group. Remarks The For Each block is entered if there is at least one element in group.
Once the loop has been entered, all the statements in the loop are executed for the first element in group. If there are more elements in group, the statements in the loop continue to execute for each element. When there are no more elements in group, the loop is exited and execution continues with the statement following the Next statement. Any number of Exit For statements may be placed anywhere in the loop as an alternative way to exit.
Exit For is often used after evaluating some condition, for example If…Then, and transfers control to the statement immediately following Next. Connect and share knowledge within a single location that is structured and easy to search. And check the application registered with the. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Collectives on Stack Overflow. Learn more. How do I open a file with VBScript?
Ask Question. Asked 11 years, 5 months ago. Active 3 years, 4 months ago. Collectives on Stack Overflow. Learn more.
Asked 5 years, 5 months ago. Active 1 year, 5 months ago. Viewed 9k times. I am working in Windows platform. Something like: AcroRd Improve this question. DavidPostill 7, 9 9 gold badges 37 37 silver badges 56 56 bronze badges. Inian, updated my question, — ehh. Blobonat, how does it help?
0コメント